Our "Orders" page has
been restored through an affiliation with
www.TheBrainCan.com . All of our books will be released
through the book store at
www.TheBrainCan.com . Go now and order our pyramid books, The
Solomon Series: Great Pyramid Mystery Resolved (Volumes 1, 2, 3).
When you watch the videos in our
library, click the "Like" or "Share" link for Facebook
under the image. Then post the URL/Webpage link in to the pop-up
link box. When you post it, you will be helping to spread the good
news. We thank you in advance.
The
Whidden Cavity
is identified in part by the videos below. The "cavity" or pit
derives its name from Theodore L. (Ted) Whidden who developed and
presented what is likely the first realistic, plausible, and seamless
construction system for the Great Pyramid of Egypt. Whidden's work
in ancient technologies, theology, Egyptology, and a form of archaeology
that he developed continue to astound those who dig in to the systems
and theories.
The easiest way to "find" the
Whidden Cavity is to look at the eastern face of the Great Pyramid.
At the mid-body location on this east side is a large square pit that is
large enough to see from satellite aerial (and on GoogleEarth).
The pit/cavity is so large that a wall in the middle of the structure
can also be seen in satellite imagery.
The Whidden Cavity is not only
located at the mid-body eastern side of the Great Pyramid, but it is
also at the convergence location of the horizontal rock paths from the
quarry where the stones for the Great Pyramid were once located.
Note this simplicity of the design, movement and solution. Three
of the four sides of the pyramid are virtually unapproachable with cargo
(rocks/stones), meanwhile horizontal rock paths are found on the eastern
side which all converge at a HOLE! That "hole" is the Whidden
Cavity.
The horizontal rock paths
identified by Ted Whidden
years ago "connect" a large hole in the desert
(quarry) to a large pile of rock (The Great Pyramid). Very simply
the rocks were moved from one location (A Quarry Whidden calls the
"Sphinx Bluff") to the construction location. It is not any more
complicated than that.
Our founder when noting this very
simple system noted that if rocks we were moved along horizontal paths
we would expect to find a big hill or pile at the convergence location.
Yes, we do find a pyramid (The Great Pyramid of Egypt's Giza Plateau),
but we find the initial location of these lines of movement (horizontal
paths) is a HOLE (The Whidden Cavity). Why would we find a big
hole or pit at the convergence location of all these rock paths?
Our research team studied the
dynamics of the Whidden Cavity and found that the same basic design is
found throughout much of Egypt, and throughout the construction of the
Great Pyramid itself. The size and material utilized changed
throughout development, but the basic mechanical design and function is
quite clear once one separates the mystic pursuits and hooey from facts
and reality.
No matter how one glorifies rock
movements, there is only two ways to move a rock or stone. There
is the horizontal movement and the vertical movement. It is that
simple. Since the horizontal paths are clearly delineated (but
often overlooked by mystics), and they converge at one central location,
we decided to explore that concept of vertical rock/stone movements.
When we cleared our minds of errors
in past research we found the same combination of horizontal and
vertical mechanical structures are found throughout the structure, in
fact a complete, seamless design concept can be developed by simply
following the horizontal indicators to the vertical, then from the
vertical to the horizontal, etc. It is not a mystery and it is not
even that complicated.
The key to the truth is often found
in replicated design. No other theory ever introduced used the
existing information, structure and materials. Most are developed
out of nothingness without physical evidence or supports. Not a
single one uses the obvious found when the same pattern continues to
demonstrate itself within the structure.
Replications of the Whidden Cavity
is found in the Queen's Chamber Niche, the antechamber of the King's
Chamber, in the Subterranean Chamber, and other more obscure voids and
spaces found within the structure. For possibly the first time
ever a theory is put forward that actually uses the known spaces and
patterns of design and structure. It is so easy and simple to
understand.
The ancient Egyptians were known
for having wood working skills, tools, and large timber management.
This is easily demonstrated by the large boats found buried on the south
side of the Great Pyramid. The Egyptians used their ability to cut
squared timbers and built float devices (pistons) to create lift-assist
devices uses buoyancy and floatation.
Some of the cavities were designed
to allow the water to be easily removed or displaced, thus lowering the
float piston in the chamber. The piston was then loaded with
stones and the space flooded to provide a lift. The Whidden Cavity
on the eastern face worked somewhat in this manner.
Replications of the design such as
found in the Queen's Chamber used the weight of men to push a floating
piston down. The water in the area/chamber would overflow its
containment flooding the floor of the space nearby (Thus the sunken
floor of the Queen's Chamber). Then a stone or stones would be
placed on the piston and men would jump off. The buoyancy effect
on the piston would offer a lift assistance to the vertical lift.
In essence it is a simple hydraulic lift/jack.............One must come
to understand that the stones of the Great Pyramid REALLY are not that
big. At the Queen's Chamber level and above the majority of stones
are only about 2.5 feet cubed (or less). We explain this in other
videos. One of the great deceptions/illusions is the impression of
massive, perfect stones. We demonstrate the majority are not
large, nor flawless. The truth may hurt for mystics, but it will
indeed set you free.
The operation of the Whidden Cavity
acted much like the lift mechanism found in the Queen's Chamber.
The piston/cavity had a levy built around it. Part of that levy
(The Whidden Levy) survives to this day. The levy had a hole (with
a plug) at the bottom of it, and water reservoirs all around. The
piston was lowered by removing the plug, then raised by plugging the
bottom of the levy and filling the cavity with water. In so doing
very significant amounts of lift could be created. Men on top of
the plateau (a pyramid in construction is often plateau on plateau
design) would be able to help guide and lift the piston up.
The system may be best understood
visually. Check out the videos and free downloads on this site.
Bible time line studies Joseph Moses Aaron King David Saul Solomon
Ezekiel Isaiah timeline issues Biblically accurate study
Egypt, Egyptian, Great
Pyramid, Giza Plateau, Giza Pyramids, Pyramid Drawings, Pyramid
Sketches, Pyramid Theory, Pyramid Construction, Pyramid Tombs,
Pyramidology, Pyramid Alignments, celestial alignments, Pyramid Mystery,
Great Pyramid Solved, Khufu, Cheops, Khafre, Robert Schoch, Professor
Robert Schoch, Jean-Pierre Houdin, Steven Myers, Ron Wyatt, Sir Flinders Petrie,
William Petrie, Egyptian Archaeology, Egyptian Pyramids, Egyptian
Pharaohs, Ancient Egypt, Pyramid Text, Great Architect, Freemason,
Freemasonry, archeology, Egyptology, Sphinx, Great Sphinx, Atlantis,
Atlantean
You may also go to our online
system for free electronic downloads, or for books in print purchase
products as they are available. Go to "Materials
and Tools" to get the project started.